vs-20ets..fppbf series, vs-20ets..fp-m3 series www.vishay.com vishay semiconductors revision: 12-feb-16 1 document number: 94339 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage, input rectifier diode, 20 a features ? very low forward voltage drop ? 150 c max. operating junction temperature ? glass passivated pellet chip junction ? designed and qualified according to jedec ? -jesd 47 ? fully isolated package (v ins = 2500 v rms ) ? ul e78996 approved ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? input rectification ? vishay semiconductors switch es and output rectifiers which are available in identical package outlines description high voltage rectifiers opti mized for very low forward voltage drop with moderate leakage. these devices are intended for use in main rectification (single or three phase bridge). product summary package to-220fp i f(av) 20 a v r 800 v to 1200 v v f at i f 1.1 v i fsm 300 a t j max. 150 c diode variation single die 2 1 cathode 3 anode to-220 full-pak 1 2 3 available output current in typical applications applications single-phase bridge three-phase bridge units capacitive input filter t a = 55 c, t j = 125 c ? common heatsink of 1 c/w 18 22 a major ratings and characteristics symbol characteristics values units i f(av) sinusoidal wa v eform 20 a v rrm range 800/1200 v i fsm 300 a v f 10 a, t j = 25 c 1.0 v t j -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-20ets08fpp b f, vs-20ets08fp-m3 800 900 1 vs-20ets12fpp b f, vs-20ets12fp-m3 1200 1300
vs-20ets..fppbf series, vs-20ets..fp-m3 series www.vishay.com vishay semiconductors revision: 12-feb-16 2 document number: 94339 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings parameter symbol test conditions values units maximum a v erage forward current i f(av) t c = 51 c, 180 conduction half sine wave 20 a maximum peak one cycle ? non-repetiti v e surge current i fsm 10 ms sine pulse, rated v rrm applied 250 10 ms sine pulse, no v oltage reapplied 300 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 316 a 2 s 10 ms sine pulse, no v oltage reapplied 442 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no v oltage reapplied 4420 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward v oltage drop v fm 20 a, t j = 25 c 1.1 v forward slope resistance r t t j = 150 c 10.4 m ? threshold v oltage v f(to) 0.85 v maximum re v erse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 1.0 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 2.8 c/w maximum thermal resistance, ? junction to am b ient r thja 62 typical thermal resistance, ? case to heatsink r thcs mounting surface, smooth, and greased 0.5 approximate weight 2g 0.07 oz. mounting torque minimum 6.0 (5.0) kgf cm (l b f in) maximum 12 (10) marking de v ice case style to-220 full-pak 20ets08fp 20ets12fp
vs-20ets..fppbf series, vs-20ets..fp-m3 series www.vishay.com vishay semiconductors revision: 12-feb-16 3 document number: 94339 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ng characteristics fig. 2 - current rati ng characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 100 125 150 75 50 25 maximum allowable case temperature (c) average forward current (a) 24 20 16 12 0 8 4 cond u ction angle ? v s-20ets.. series 1 8 0 120 90 60 30 75 100 125 150 50 25 maximum allowable case temperature (c) average forward current (a) 35 30 25 20 15 10 5 0 360 1 8 0 120 90 60 30 v s-20ets.. series ? cond u ction period 5 0 25 20 15 10 30 maximum average forward power loss (w) average forward current (a) 24 20 16 12 8 4 0 rms limit 1 8 0 120 90 60 30 v s-20ets.. series t j = 150 c cond u ction angle ? 5 30 25 20 15 10 0 35 maximum average forward power loss (w) average forward current (a) 5 15 25 20 10 0 v s-20ets.. series t j = 150 c ? cond u ction period dc 1 8 0 120 90 60 30 rms limit 50 300 200 250 150 100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 10 100 1 v s-20ets.. series at any rated load condition and w ith rated v rrm applied follo w ing s u rge. initial t j = 150 c at 60 hz 0.00 8 3 s at 50 hz 0.0100 s 50 300 250 200 150 100 peak half sine wave forward current (a) pulse train duration (s) 0.1 1 0.01 v s-20ets.. series maxim u m non-repetitive s u rge c u rrent vers u s p u lse train d u ration. initial t j = 150 c no voltage reapplied rated v rrm reapplied
vs-20ets..fppbf series, vs-20ets..fp-m3 series www.vishay.com vishay semiconductors revision: 12-feb-16 4 document number: 94339 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics 1 100 10 1000 i f - instantaneous forward current (a) instantaneous forward voltage (v) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 4.0 0 t j = 25 c t j = 150 c v s-20ets.. series 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 100 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) v s-20ets.. series single p u lse (thermal resistance) d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.0 8
vs-20ets..fppbf series, vs-20ets..fp-m3 series www.vishay.com vishay semiconductors revision: 12-feb-16 5 document number: 94339 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-20ets08fppbf 50 1000 anti static plastic tubes vs-20ets08fp-m3 50 1000 anti static plastic tubes vs-20ets12fppbf 50 1000 anti static plastic tubes vs-20ets12fp-m3 50 1000 anti static plastic tubes links to related documents dimensions www.vishay.com/doc?95005 part marking information to-220 fp pbf www.vishay.com/doc?95009 to-220 fp -m3 www.vishay.com/doc?95440 1 - current rating (20 = 20 a) - vishay semiconductors product 2 - circuit configuration: 3 - package: t = to-220 full-pak 4 - type of silicon: s = standard recovery rectifier 5 - voltage ratings 6 - 7 8 e = single diode 08 = 800 v 12 = 1200 v device code 5 1 3 2 4 6 7 8 20 vs- e t s 12 fp pbf - environmental digit: pbf = lead (pb)-free and rohs-compliant -m3 = halogen-free, rohs-compliant, and terminations lead (pb)-free
outline dimensions www.vishay.com vishay semiconductors revision: 20-jul-11 1 document number: 95005 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters 5 0.5 3.3 3.1 5 0.5 0.9 0.7 2.54 typ. 2.54 typ. 10.6 10.4 3.7 3.2 7.31 6.91 0.61 0.38 2.85 2.65 2.8 2.6 1.4 1.3 10 4.8 4.6 16.0 15.8 16.4 15.4 (2 places) r 0.7 r 0.5 hole ? 3.4 3.1 typ. 1.15 1.05 13.56 13.05 lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220 full-pak
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
